miniupnpd8

Usage

Overview

miniupnpd act as a UPnP Internet Gateway Device. It is designed to run on the gateway between the internet and a NAT'ed LAN. It provides an interface, as defined in the UPnP standard, for enabling clients on the LAN to ask for port redirections.

Options

-f config_file

load the config from file.

-i ext_ifname

interface used to connect to the internet.

-o ext_ip

address used to connect to the internet. default address of the interface will be used if not specified.

-a listening_ip

address on the LAN. -a option can by used multiple time if LAN is subdivised in several subnetworks.

-p port

port used for HTTP.

-d

debug mode : do not go to background, output messages on console and do not filter out low priority messages.

-U

report system uptime instead of daemon uptime to clients.

-S0

disable "secure" mode so clients can only add mappings to other IPs

-N

enable NAT-PMP and PCP functionality.

-u uuid

set the uuid of the UPnP Internet Gateway Device.

-s serial

serial number for the UPnP Internet Gateway Device.

-m model_number

model number for the UPnP Internet Gateway Device.

-t notify_interval

SSDP notify interval in seconds. Default is 900 seconds. SSDP announce messages will be broadcasted at this interval.

-P pid_filename

pid file. default is /var/run/miniupnpd.pid

-B down up

download and upload bitrates reported to clients.

-w url

presentation url. default is first address on LAN, port 80.

-r clean_ruleset_interval

(minimum) interval between unused rules cleaning checks.

-A permission rule

use following syntax for permission rules :
(allow|deny) (external port range) ip/mask (internal port range)
examples :
"allow 1024-65535 192.168.1.0/24 1024-65535"
"deny 0-65535 0.0.0.0/0 0-65535"

-b BOOTID

sets the value of BOOTID.UPNP.ORG SSDP header

-1

force reporting IGDv1 in rootDesc when compiled as IGDv2 *use with care*