mbim-network1
Simple network management of mbim devices
Usage
mbim-network [OPTIONS]
[DEVICE]
[COMMAND]
Overview
Simple network management of MBIM devices
Commands:
start
|
Start network connection |
|---|---|
stop
|
Stop network connection |
status
|
Query network connection status |
Options
-
--profile=[PATH] -
Use the profile in the specified path
-
--help, -h -
Show help options
-
--version -
Show version
Notes:
-
1) [DEVICE] is given as the full path to the cdc-wdm character device, e.g.:
-
/dev/cdc-wdm0
-
2) The mbim-network script requires a profile to work. Unless explicitly specified with `--profile', the file is assumed to be available in the following path:
-
/etc/mbim-network.conf
-
3) The APN to use should be configured in the profile, in the following way (e.g. assuming APN is called 'internet'):
-
APN=internet
-
4) Optional APN user/password strings may be given in the following way:
-
APN_USER=user APN_PASS=password
-
5) If APN user/password is specified, the authentication protocol to use (one of PAP, CHAP or MSCHAPV2) must also be specified in the following way:
-
APN_AUTH=protocol
-
6) If you want to instruct the mbim-network script to use the mbim-proxy setup, you can do so by configuring the following line in the profile:
-
PROXY=yes
-
7) Once the mbim-network script reports a successful connection you still need to run a DHCP client on the associated WWAN network interface.
Releases
7 releases since Debian 8 (Jessie); the text changed 6 times.
--profile since Debian 9 (Stretch);
-h since Debian 10 (Buster).