lpc21isp1

Is an in-circuit programming (isp) tool for the nxp(philips) microcontrollers

Usage

lpc21isp [[Options]] [file [file []]] [comport] [baudrate] [Oscillator_in_kHz]

lpc21isp [-bin] [-hex] [-term] [-termonly] [-localecho] [-detectonly] [-debug0] [-debug3] [-debug5] [-donotstart] [-try<n>] [-wipe] [-control] [-controlswap] [-controlinv] [-verify] [-logfile] [-halfduplex] [-ADARM] [-PHILIPSARM]

Overview

lpc21isp is an in-circuit programming (ISP) tool for the NXP(Philips) LPC1100/LPC1300/LPC1700/LPC2000 series ARM7/Cortex-M0/Cortex-M3 microcontrollers.

Options

-bin: for uploading binary file

-hex: for uploading file in intel hex format (default)

-term: for starting terminal after upload

-termonly: for starting terminal without an upload

-localecho: for local echo in terminal

-detectonly: detect only used LPC chiptype (PHILIPSARM only)

-debug0: for no debug

-debug3: for progress info only

-debug5: for full debug

-donotstart: do not start MCU after download

-try<n>: try n times to synchronise

-wipe: Erase entire device before upload

-control: for controlling RS232 lines for easier booting (Reset = DTR, EnableBootLoader = RTS)

-controlswap: swap RS232 control lines (Reset = RTS, EnableBootLoader = DTR)

-controlinv: Invert state of RTS & DTR (0=true/assert/set, 1=false/deassert/clear).

-verify: Verify the data in Flash after every writes to sector. To detect errors in writing to Flash ROM

-logfile: for enabling logging of terminal output to lpc21isp.log

-halfduplex: use halfduplex serial communication (i.e. with K-Line)

-ADARM: for downloading to an Analog Devices ARM microcontroller ADUC70xx

-PHILIPSARM: for downloading to a microcontroller from NXP(Philips) LPC13xx/LPC17xx/LPC2000 family (default)

Releases

Unchanged in 6 releases since Debian 8 (Jessie).

8–13