libinput-debug-events1

libinput configuration options

--apply-to="pattern"

Configuration options are only applied where the device name matches the pattern. This pattern has no effect on the --disable-sendevents option.

--disable-sendevents="pattern"

Set the send-events option to disabled for the devices matching patterns. This option is not affected by the --apply-to="pattern" option.

--enable-drag|--disable-drag

Enable or disable tap-and-drag

--enable-drag-lock|--disable-drag-lock

Enable (in timeout mode) or disable drag-lock --enable-drag-lock=[sticky|timeout] Enable drag-lock in sticky or timeout mode

--enable-dwt|--disable-dwt

Enable or disable disable-while-typing

--enable-dwtp|--disable-dwtp

Enable or disable disable-while-trackpointing

--enable-left-handed|--disable-left-handed

Enable or disable left handed button configuration

--enable-middlebutton|--disable-middlebutton

Enable or disable middle button emulation

--enable-natural-scrolling|--disable-natural-scrolling

Enable or disable natural scrolling

--enable-scroll-button-lock|--disable-scroll-button-lock

Enable or disable the scroll button lock

--enable-tap|--disable-tap

Enable or disable tap-to-click

--set-area="x1/y1 x2/y2"

Set the tablet area to the rectangle described by the two points x1/y1 and x2/y2. All coordinates must be in the range [0.0, 1.0].

--set-calibration="1.0 0.0 0.0 0.0 1.0 0.0"

Set the first 6 elements of a 3x3 matrix to use for calibration. The third row of the matrix is always "0.0 0.0 0.1".

--set-click-method=[none|clickfinger|buttonareas]

Set the desired click method

--set-clickfinger-map=[lrm|lmr]

Set button mapping for clickfinger

--set-custom-points="<value>;...;<value>"

Sets the n points defining a custom acceleration function The points are defined in a semicolon-separated list of floating point non-negative numbers. Defaults to "0.0;1.0". This only applies to the custom profile.

--set-custom-step=<value>

Sets the distance along the x-axis between each point, starting from 0. Defaults to 1.0. This only applies to the custom profile.

--set-custom-type=[fallback|motion|scroll]

Sets the type of the custom acceleration function. Defaults to fallback. This only applies to the custom profile.

--set-eraser-button-button=[BTN_STYLUS|BTN_STYLUS2|BTN_STYLUS3]

Sets the eraser button button to the given tablet tool button. Only takes effect if combined with --set-eraser-button-mode=on-button-down.

--set-eraser-button-mode=[default|on-button-down]

Sets the eraser button mode to the given mode.

--set-pressure-range=<min>:<max>

Set the tablet tool pressure range to min:max. min and max must be in range [0.0, 1.0].

--set-profile=[adaptive|flat|custom]

Set pointer acceleration profile

--set-rotation-angle=<degrees>

Set the rotation angle in degrees (0 to 360).

--set-scroll-button=BTN_MIDDLE

Set the button to the given button code

--set-scroll-method=[none|twofinger|edge|button|circular]

Set the desired scroll method

--set-sendevents=[disabled|enabled|disabled-on-external-mouse]

Set the given sendevents mode. This option overrides --disable-sendevents="pattern" for any devices it matches via the --apply-to="pattern" option.

--set-speed=<value>

Set pointer acceleration speed. The allowed range is [-1, 1]. This only applies to the flat or adaptive profile.

--set-tap-map=[lrm|lmr]

Set button mapping for tapping