ldpctl8

Usage

Overview

The ldpctl program controls the ldpd(8) daemon. Commands may be abbreviated to the minimum unambiguous prefix; for example, s i for show interfaces.

The following commands are available:

clear neighbors [address] Delete entries from the neighbor table. address can be used to limit the scope of the command to the given neighbor.

fib couple

Insert the learned labels into the Label Forwarding Information Base a.k.a. the kernel routing table.

fib decouple

Remove the learned labels from the Label Forwarding Information Base a.k.a. the kernel routing table.

log brief

Disable verbose debug logging.

log verbose

Enable verbose debug logging.

reload

Reload the configuration file.

show fib [family family] [destination | filter] Show the Label Forwarding Information Base. family, if given, limit the output to the given address family. destination can be specified to show the route matching a destination IP address. filter can be any of the following:

connected

Show only connected routes.

interface

Show only interfaces.

static

Show only static routes.

connected, and static may be specified together.

show interfaces [family family] Show details for all interfaces. family, if given, limit the output to the given address family.

show discovery [family family] Show adjacencies. family, if given, limit the output to the given address family.

show neighbor [family family] Show neighbors. family, if given, limit the output to the given address family.

show lib [family family] Show the Label Information Base. family, if given, limit the output to the given address family.

show l2vpn bindings

Show the PWID Label Information Base.

show l2vpn pseudowires

Show the status of the configured pseudowires.

Files

/var/run/ldpd.sock

UNIX-domain socket used for communication with ldpd(8).