knet_handle_pmtud_set3
Set the current interface mtu.
Usage
#include <libknet.h>
int knet_handle_pmtud_set(
knet_handle_t knet_h,
unsigned int iface_mtu
);
Overview
knet_handle_pmtud_set
knet_h - pointer to knet_handle_t
iface_mtu - current interface MTU, value 0 to 65535. 0 will re-enable automatic MTU discovery. In a setup with multiple interfaces, please specify the lowest MTU between the selected intefaces. knet will automatically adjust this value for all headers overhead and set the correct data_mtu. data_mtu can be retrivied with knet_handle_pmtud_get(3) or applications will receive a pmtud_nofity event if enabled via knet_handle_enable_pmtud_notify(3).
Return value
knet_handle_pmtud_set returns 0 on success -1 on error and errno is set.
Releases
3 releases since Debian 11 (Bullseye); the text changed 2 times.
See also
knet_handle_remove_datafd(3)
Remove a file descriptor from knet.
knet_handle_get_stats(3)
Get statistics for compression & crypto.
knet_host_add(3)
Add a new host ID to knet.
knet_handle_pmtud_setfreq(3)
Set the interval between PMTUd scans.
knet_handle_pmtud_get(3)
Get the current data MTU.
knet_handle_crypto_use_config(3)
specify crypto configuration to use for TX
knet_host_get_id_by_host_name(3)
Get the ID of a host given its name.
knet_host_get_status(3)
Get the status of a host.
knet_link_add_acl(3)
Add access list entry to an open link.
knet_link_get_pong_count(3)
Get the pong count for a link.
knet_link_get_priority(3)
Get the priority for a link.
knet_handle_free(3)
Destroy a knet handle, free all resources.
knet_handle_enable_sock_notify(3)
Register a callback to receive socket events.
knet_handle_get_datafd(3)
Get the file descriptor associated with a channel.
knet_recv(3)
Receive data from knet nodes.
knet_link_get_ping_timers(3)
Get the ping timers for a link.
knet_log_get_subsystem_id(3)
Get a logging system ID from its name.
knet_host_remove(3)
Remove a host ID from knet.
knet_host_enable_status_change_notify(3)
Install a callback to get host status change events.
knet_strtoaddr(3)
Convert a hostname string to an address.
knet_link_rm_acl(3)
Remove access list entry from an open link.
knet_send(3)
Send data to knet nodes.
knet_handle_enable_pmtud_notify(3)
install a callback to receive PMTUd changes
knet_handle_get_transport_reconnect_interval(3)
Get the interval between transport attempts to reconnect a failed link.
knet_link_get_enable(3)
Find out whether a link is enabled or not.
knet_link_set_priority(3)
Set the priority for a link.
knet_log_set_loglevel(3)
Set the logging level for a subsystem.
knet_handle_get_channel(3)
Get the channel associated with a file descriptor.
knet_link_get_config(3)
Get the link configutation information.
knet_link_get_link_list(3)
Get a list of links connecting a host.
knet_get_transport_list(3)
Get a list of the transports support by this build of knet.
knet_get_transport_id_by_name(3)
Get a transport ID from its name.
knet_log_get_loglevel_id(3)
Get a logging level ID from its name.
knet_handle_new_ex(3)
create a new instance of a knet handle
knet_host_set_name(3)
Set the name of a knet host.
knet_addrtostr(3)
Convert an address to a host name.
knet_handle_setfwd(3)
Start packet forwarding.
knet_get_compress_list(3)
Get a list of support compression types.
knet_host_set_policy(3)
Set the switching policy for a host's links.
knet_get_transport_name_by_id(3)
Get a transport name from its ID number.
knet_handle_enable_filter(3)
install a filter to route packets
knet_handle_crypto_rx_clear_traffic(3)
enable or disable RX processing of clear (unencrypted) traffic
knet_handle_compress(3)
Set up packet compression.
knet_link_get_status(3)
Get the status (and statistics) for a link.
knet_handle_add_datafd(3)
Install a file descriptor for communication.
knet_send_sync(3)
Synchronously send data to knet nodes.
knet_log_get_loglevel_name(3)
Get a logging level name from its numeric ID.
knet_handle_enable_access_lists(3)
Enable or disable usage of access lists (default: off)
knet_host_get_host_list(3)
Get a list of hosts known to knet.
knet_host_get_policy(3)
Get the switching policy for a host's links.
knet_link_set_enable(3)
Enable traffic on a link.
knet_link_set_pong_count(3)
Set the pong count for a link.
knet_log_get_subsystem_name(3)
Get a logging system name from its numeric ID.
knet_host_get_name_by_host_id(3)
Get the name of a host given its ID.
knet_link_clear_config(3)
Clear link information and disconnect the link.
knet_log_get_loglevel(3)
Get the logging level for a subsystem.
knet_handle_new(3)
knet_handle_new_ex with flags = KNET_HANDLE_FLAG_PRIVILEGED.
knet_handle_pmtud_getfreq(3)
Get the interval between PMTUd scans.
knet_handle_clear_stats(3)
Clear knet stats, link and/or handle.
knet_link_set_config(3)
Configure the link to a host.
knet_handle_crypto_set_config(3)
set up packet cryptographic signing & encryption
knet_handle_crypto(3)
set up packet cryptographic signing & encryption
knet_get_crypto_list(3)
Get a list of supported crypto libraries.
knet_handle_set_transport_reconnect_interval(3)
Set the interval between transport attempts to reconnect a failed link.
knet_link_clear_acl(3)
Remove all access list entries from an open link.
knet_link_set_ping_timers(3)
Set the ping timers for a link.
knet_link_insert_acl(3)
Insert access list entry to an open link at given index.
Referred to by
knet_recv(3)
Receive data from knet nodes.
knet_send(3)
Send data to knet nodes.
knet_host_add(3)
Add a new host ID to knet.
knet_addrtostr(3)
Convert an address to a host name.
knet_send_sync(3)
Synchronously send data to knet nodes.
knet_strtoaddr(3)
Convert a hostname string to an address.
knet_handle_new(3)
knet_handle_new_ex with flags = KNET_HANDLE_FLAG_PRIVILEGED.
knet_handle_free(3)
Destroy a knet handle, free all resources.
knet_host_remove(3)
Remove a host ID from knet.
knet_link_rm_acl(3)
Remove access list entry from an open link.
knet_link_add_acl(3)
Add access list entry to an open link.
knet_handle_crypto(3)
set up packet cryptographic signing & encryption
knet_handle_new_ex(3)
create a new instance of a knet handle
knet_handle_setfwd(3)
Start packet forwarding.
knet_host_set_name(3)
Set the name of a knet host.
knet_link_clear_acl(3)
Remove all access list entries from an open link.
knet_get_crypto_list(3)
Get a list of supported crypto libraries.
knet_handle_compress(3)
Set up packet compression.
knet_host_get_policy(3)
Get the switching policy for a host's links.
knet_host_get_status(3)
Get the status of a host.
knet_host_set_policy(3)
Set the switching policy for a host's links.
knet_link_get_config(3)
Get the link configutation information.
knet_link_get_enable(3)
Find out whether a link is enabled or not.
knet_link_get_status(3)
Get the status (and statistics) for a link.
knet_link_insert_acl(3)
Insert access list entry to an open link at given index.
knet_link_set_config(3)
Configure the link to a host.
knet_link_set_enable(3)
Enable traffic on a link.
knet_handle_get_stats(3)
Get statistics for compression & crypto.
knet_handle_pmtud_get(3)
Get the current data MTU.
knet_log_get_loglevel(3)
Get the logging level for a subsystem.
knet_log_set_loglevel(3)
Set the logging level for a subsystem.
knet_get_compress_list(3)
Get a list of support compression types.
knet_handle_add_datafd(3)
Install a file descriptor for communication.
knet_handle_get_datafd(3)
Get the file descriptor associated with a channel.
knet_link_clear_config(3)
Clear link information and disconnect the link.
knet_link_get_priority(3)
Get the priority for a link.
knet_link_set_priority(3)
Set the priority for a link.
knet_get_transport_list(3)
Get a list of the transports support by this build of knet.
knet_handle_clear_stats(3)
Clear knet stats, link and/or handle.
knet_handle_get_channel(3)
Get the channel associated with a file descriptor.
knet_host_get_host_list(3)
Get a list of hosts known to knet.
knet_link_get_link_list(3)
Get a list of links connecting a host.
knet_link_get_pong_count(3)
Get the pong count for a link.
knet_link_set_pong_count(3)
Set the pong count for a link.
knet_log_get_loglevel_id(3)
Get a logging level ID from its name.
knet_handle_enable_filter(3)
install a filter to route packets
knet_handle_pmtud_getfreq(3)
Get the interval between PMTUd scans.
knet_handle_pmtud_setfreq(3)
Set the interval between PMTUd scans.
and 19 more pages.