isotpserver1
Manual page for isotpserver 2023.03-1
Usage
isotpserver -l
<port>
-s
<can_id>
-d
<can_id>
[options]
<CAN
interface>
Options
ip addressing:
-
-l <port> -
* (local port for the server)
isotp addressing:
-
-s <can_id> -
* (source can_id. Use 8 digits for extended IDs)
-
-d <can_id> -
* (destination can_id. Use 8 digits for extended IDs)
-
-x <addr>[:<rxaddr>] -
(extended addressing / opt. separate rxaddr)
-
-L <mtu>:<tx_dl>:<tx_flags> -
(link layer options for CAN FD)
padding:
-
-p [tx]:[rx] -
(set and enable tx/rx padding bytes)
-
-P <mode> -
(check rx padding for (l)ength (c)ontent (a)ll)
rx path:
-
(config, which is sent to the sender / data source)
-
-b <bs> -
(blocksize. 0 = off)
-
-m <val> -
(STmin in ms/ns. See spec.)
-
-w <num> -
(max. wait frame transmissions)
tx path:
|
(config, which changes local tx settings) |
|
|
(transmit time in nanosecs) |
(* = mandatory option)
All values except for '-l' and '-t' are expected in hexadecimal values.
Releases
4 releases since Debian 10 (Buster); the text changed 2 times.