imx_usb1
Program to upload an u-boot image to the device and run
Usage
imx_usb [{-v | --verify}]
[{-d | --debugmode}]
[{-c
DIR | --configdir=DIR}]
[{-b
NUM | --bus=NUM}]
[{-D
NUM | --device=NUM}]
FILE
[-lLOADADDR]
[-sSIZE]
imx_usb [{-h | --help}]
Overview
This manual page documents briefly the imx_usb command.
This manual page was written for the Debian distribution because the original program does not have a manual page.
imx_usb is a program that can upload an image to the device memory and run. Thus it is able to de-brick the device supported by this tool.
Options
The program follows the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below.
-
-v, --verify -
Verify downloaded data.
-
-d, --debugmode -
Enable debug logs.
-
-c DIR, --configdir=DIR -
Reading configuration directory from non standard directory.
-
-b NUM, --bus=NUM -
Filter bus number.
-
-D NUM, --device=NUM -
Filter device address.
-
-h, --help -
Show summary of options.
Files
/usr/share/imx-usb-loader/imx-loader.d/*.conf
The system-wide configuration file to control the behaviour of imx_usb.
Diagnostics
The following diagnostics may be issued on stderr:
no matching USB device found.
The supported device cannot be found on USB bus. Use the --debugmode option, to get more info.
imx_usb provides some return codes, that can be used in scripts:
| Code | Diagnostic |
| 0 | Program exited successfully. |
| 1 | Something wrong. |
Releases
4 releases since Debian 10 (Buster); the text changed 2 times.