imx_uart1
Program to upload an u-boot image to the device and run
Usage
imx_uart [{-v | --verify}]
[{-d | --debugmode}]
[{-n | --no-rtscts}]
[{-N | --no-association}]
UART
CONFIG
FILE
[-lLOADADDR]
[-sSIZE]
imx_uart [{-h | --help}]
Overview
This manual page documents briefly the imx_uart command.
This manual page was written for the Debian distribution because the original program does not have a manual page.
imx_uart is a program that can upload an image to the device memory and run. Thus it is able to de-brick the device supported by this tool.
Options
The program follows the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below.
-
-v, --verify -
Verify downloaded data.
-
-d, --debugmode -
Enable debug logs.
-
-n, --no-rtscts -
Do not use RTS/CTS flow control.
-
-N, --no-association -
Do not do serial Association Phase.
-
-h, --help -
Show summary of options.
Files
/usr/share/imx-usb-loader/imx-loader.d/*.conf
The system-wide configuration file to control the behaviour of imx_uart.
Diagnostics
The following diagnostics may be issued on stderr:
imx_uart provides some return codes, that can be used in scripts:
| Code | Diagnostic |
| 0 | Program exited successfully. |
| 1 | Something wrong. |
Releases
4 releases since Debian 10 (Buster); the text changed 2 times.