i7404
Intel i740 video driver
Usage
Section "Device" Identifier "devname" Driver "i740" ... EndSection
Overview
i740 is an Xorg driver for Intel i740 video cards.
Supported hardware
The i740 driver supports Intel 740 based cards. A list of cards reported to work is provided in the README file with the driver source.
Configuration details
Please refer to xorg.conf(5) for general configuration details. This section only covers configuration details specific to this driver.
The driver auto-detects all device information necessary to initialize the card.
However, if you have problems with auto-detection, you can specify:
VideoRam- in kilobytes
DacSpeed- in MHz
MemBase- physical address of the linear framebuffer
IOBase- physical address of the memory mapped IO registers
The following driver options are supported on all chipsets:
Option "NoAccel" "boolean"
|
Disable or enable 2D acceleration. Default: acceleration is enabled. |
|---|---|
Option "SWCursor" "boolean"
|
Request a software cursor (hardware is default). Default: off |
Option "SDRAM" "boolean"
|
Force the use of SDRAM timings. Default: off |
Option "SGRAM" "boolean"
|
Force the use of SGRAM timings. Default: off |
Option "SlowRam" "boolean"
|
Force the use of slower ram timings. Default: off |
Option "Dac6Bit" "boolean"
|
Force the use of a 6 Bit Dac (8 Bit is the default). Default: off |
Option "UsePIO" "boolean"
|
Force the use of programmed IO (Memory mapped is the default). Default: off |
Note: the i740 X server should automatically detect whether your card has SGRAM or SDRAM. Use the "sgram" and "sdram" options if it is incorrectly detected.
Releases
5 releases since Debian 3.0 (Woody); the text changed 3 times.