gtkterm1

Usage

Overview

gtkterm is a simple GTK+ terminal used to communicate with the serial port.

Options

gtkterm accepts the following options:

-h, --help Help screen.

-c, --config <configuration>

Load configuration (default is "default").

-p, --port <device>

Serial port device (default /dev/ttyS0).

-s, --speed <speed>

Serial port speed (default 115200).

-b, --bits <bits>

Number of bits (default 8).

-t, --stopbits <stopbits>

Number of stopbits (default 1).

-d, --delay <ms>

End of line delay in ms (default none).

-r, --char <char>

Wait for a special char at end of line (default none).

-f, --file <filename>

Default file to send (default none).

-e, --echo

Set local echo.

-x, --rts_time_before <ms>

For rs485, time in ms before transmit with rts on

-y, --rts_time_after <ms>

For rs485, time in ms after transmit with rts on

-e, --echo

Switch on local echo

-L, --disable-port-lock

Do not lock serial port. Allows to send to serial port from different terminals.