gnutv1

Usage

Overview

This manual page documents briefly the gnutv commands.

gnutv is a digital tv utility.

Options

-adapter <id>

adapter to use (default 0)

-frontend <id>

frontend to use (default 0)

-demux <id>

demux to use (default 0)

-caslotnum <id>

ca slot number to use (default 0)

-channels <filename>

channels.conf file

-secfile <filename>

Optional sec.conf file

-secid <secid>

ID of the SEC configuration to use, one of:
* UNIVERSAL (default) - Europe, 10800 to 11800 MHz and 11600 to 12700 Mhz, Dual LO, loband 9750, hiband 10600 MHz
* DBS - Expressvu, North America, 12200 to 12700 MHz, Single LO, 11250 MHz
* STANDARD - 10945 to 11450 Mhz, Single LO, 10000 Mhz
* ENHANCED - Astra, 10700 to 11700 MHz, Single LO, 9750 MHz
* C-BAND - Big Dish, 3700 to 4200 MHz, Single LO, 5150 Mhz
* C-MULTI - Big Dish - Multipoint LNBf, 3700 to 4200 MHz, Dual LO, H:5150MHz, V:5750MHz
* One of the sec definitions from the secfile if supplied

-out decoder

Output to hardware decoder (default)

-out decoderabypass

Output to hardware decoder using audio bypass -out dvr Output stream to dvr device -out null Do not output anything -out stdout Output to stdout -out file <filename> Output stream to file -out udp <address> <port> Output stream to address:port using udp -out udpif <address> <port> <interface> Output stream to address:port using udp forcing the specified interface -out rtp <address> <port> Output stream to address:port using udp-rtp -out rtpif <address> <port> <interface> Output stream to address:port using udp-rtp forcing the specified interface

-timeout <secs>

Number of seconds to output channel for (0=>exit immediately after successful tuning, default is to output forever)

-cammenu

Show the CAM menu

-nomoveca

Do not attempt to move CA descriptors from stream to programme level -h print this help text

This manual page was written by Uwe Bugla <[email protected]>.