flames_cal_prep_sff_ofpos7

Usage

Overview

Fibre & order position determination procedure: You should feed the recipe with: - even, odd, all fibre images (FIB_FF_EVEN_RED, FIB_FF_ODD_RED, FIB_FF_ALL_RED) - single fibre images, FIB_ORDEF_(REDL|REDU) - master bias frames, MASTER_BIAS_(REDL|REDU) - master slit flatfield frames, MASTER_SFLAT_(REDL|REDU) - order guess tables, FIB_ORD_GUE_(REDL|REDU).

Products are: - Fibre order table (FIB_ORDEF_TABLE_chip) - All fibre info table (FIB_FF_ALL_INFO_TAB) - Odd fibre info table (FIB_FF_ODD_INFO_TAB) - Even fibre info table (FIB_FF_EVEN_INFO_TAB) - Slit flatfield common (SLIT_FF_COM_chip) - Slit flatfield norm (SLIT_FF_NOR_chip) - Slit flatfield data (SLIT_FF_DTC_chip) - Slit flatfield sigma (SLIT_FF_SGC_chip) - Slit flatfield bad pixel (SLIT_FF_BPC_chip) - Slit flatfield boundary (SLIT_FF_BNC_chip) - Fibre flatfield common (FIB_FF_COM_chip) - Fibre flatfield norm (FIB_FF_NOR_chip) - Fibre flatfield norm sigma (FIB_FF_NSG_chip) chip=REDL and REDU

Options

--bias_method <str>

Bias subtraction method, M for master bias frame, N for no bias subtraction, V to subtract a constant bias level defined by the parameter bias_value (str; default: ´M´). The full name of this option for the EsoRex configuration file is flames_cal_prep_sff_ofpos.bias_method [default = M].

--bias_value <int>

Bias value (only if bias_method = V) (int; default: 200). The full name of this option for the EsoRex configuration file is flames_cal_prep_sff_ofpos.bias_value [default = 200].

--clean_tmp_products <bool>

Input data format (bool; default: False). The full name of this option for the EsoRex configuration file is flames_cal_prep_sff_ofpos.clean_tmp_products [default = False].

--cubify <bool>

Cubify switch (bool; default: True). The full name of this option for the EsoRex configuration file is flames_cal_prep_sff_ofpos.cubify [default = True].

--debug <bool>

Whether or not to save intermediate results to local directory (bool; default: False). The full name of this option for the EsoRex configuration file is uves.debug [default = False].

--ext_method <str>

Extraction method (str; default: ´opt´). The full name of this option for the EsoRex configuration file is flames_cal_prep_sff_ofpos.ext_method [default = opt].

--fileprep <bool>

Slitff* and Fibreff* file preparation. If fast extraction method is used it should be set to FALSE (bool; default: True). The full name of this option for the EsoRex configuration file is flames_cal_prep_sff_ofpos.fileprep [default = True].

--filter_switch <str>

Filter switch (str; default: ´none´). The full name of this option for the EsoRex configuration file is flames_cal_prep_sff_ofpos.filter_switch [default = none].

--plotter <str>

Any plots produced by the recipe are redirected to the command specified by this parameter. The plotting command must contain the substring ´gnuplot´ and must be able to parse gnuplot syntax on its standard input. Valid examples of such a command may include ´gnuplot -persist´ and ´cat > mygnuplot$$.gp´. A finer control of the plotting options can be obtained by writing an executable script, e.g. my_gnuplot.pl, that executes gnuplot after setting the desired gnuplot options (e.g. set terminal pslatex color). To turn off plotting, set this parameter to ´no´ (str; default: ´no´). The full name of this option for the EsoRex configuration file is uves.plotter [default = no].

--process_chip <str>

For RED arm data process the redl, redu, or both chip(s) (str; default: ´both´). The full name of this option for the EsoRex configuration file is uves.process_chip [default = both].

--sat_thr <int>

Saturation threshold (int; default: 55000). The full name of this option for the EsoRex configuration file is flames_cal_prep_sff_ofpos.sat_thr [default = 55000].

--save_flat_size <int>

To be sure to use the flat part of a slit flatsone may need to subtract this bit. The default value -1, is used for automatic setting: if WCEN=520 save_flat_size=0, else save_flat_size=2. Values explicitly set by user overwrite this rule. (int; default: -1). The full name of this option for the EsoRex configuration file is flames_cal_prep_sff_ofpos.save_flat_size [default = -1].

Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.

Version

flames_cal_prep_sff_ofpos 6.1.8