fintek4
Fintek f75375 temperature sensor
Usage
fintek* at iic? flags 0x0000
Overview
The fintek driver provides support for the Fintek F75375 temperature sensor and fan controller. The sensor possesses a collection of sensor values which are made available through the sysctl(8) interface:
$ sysctl hw.sensors.fintek0 hw.sensors.fintek0.temp0=31.00 degC hw.sensors.fintek0.temp1=29.00 degC hw.sensors.fintek0.fan0=0 RPM hw.sensors.fintek0.fan1=0 RPM hw.sensors.fintek0.volt0=1.72 V DC (VCC) hw.sensors.fintek0.volt1=1.34 V DC hw.sensors.fintek0.volt2=1.73 V DC hw.sensors.fintek0.volt3=0.90 V DC
On some machines the fans will not function properly with the chip in default mode. Setting flags to 0x0001 will make the fans run at full speed to prevent overheating.
Releases
42 releases since OpenBSD 4.0; the text changed 4 times.