emissionsDrivingCycle1

Configuration Options:

-c, --configuration-file FILE

Loads the named config on startup

-C, --save-configuration FILE

Saves current configuration into FILE

--save-configuration.relative

Enforce relative paths when saving the configuration

--save-template FILE

Saves a configuration template (empty) into FILE

--save-schema FILE

Saves the configuration schema into FILE

--save-commented

Adds comments to saved template, configuration, or schema

Input Options:

-t, --timeline-file FILE

Defines the file to read the driving cycle from.

--timeline-file.skip INT

Skips the first NUM lines.

--timeline-file.separator STR

Defines the entry separator.

-n, --netstate-file FILE

Defines the netstate, route and trajectory files to read the driving cycles from.

--additional-files FILE

Load emission parameters (vTypes) from FILE(s)

-e, --emission-class STR

Defines for which emission class the emissions shall be generated.

--vtype STR

Defines the vehicle type to use for emission parameters.

Processing Options:

-a, --compute-a

If set, the acceleration is computed instead of being read from the file.

--compute-a.forward

If set, the acceleration for time t is computed from v(t+1) - v(t) instead of v(t) - v(t-1).

--compute-a.zero-correction

If set, the acceleration for time t is set to 0 if the speed is 0.

-s, --skip-first

If set, the first line of the read file is skipped.

--kmh

If set, the given speed is interpreted as being given in km/h.

--have-slope

If set, the fourth column is read and used as slope (in deg).

--slope FLOAT

Sets a global slope (in deg) that is used if the file does not contain slope information.

--begin TIME

Defines the begin time in seconds;

--end TIME

Defines the end time in seconds;

Output Options:

-o, --output STR

Defines the file to write the emission cycle results into.

--output.attributes STR[]

Defines the attributes to write.

--emission-output FILE

Save the emission values of each vehicle in XML

--sum-output FILE

Save the aggregated and normed emission values of each vehicle in CSV

--write-license

Include license info into every output file

--output-prefix STR

Prefix which is applied to all output files. The special string 'TIME' is replaced by the current time.

--precision INT

Defines the number of digits after the comma for floating point output

--precision.geo INT

Defines the number of digits after the comma for lon,lat output

-H, --human-readable-time

Write time values as hour:minute:second or day:hour:minute:second rather than seconds

Emissions Options:

--emissions.volumetric-fuel

Return fuel consumption values in (legacy) unit l instead of mg

--phemlight-path FILE

Determines where to load PHEMlight definitions from

--phemlight-year INT

Enable fleet age modelling with the given reference year in PHEMlight5

--phemlight-temperature FLOAT

Set ambient temperature to correct NOx emissions in PHEMlight5

Report Options:

-v, --verbose

Switches to verbose output

--print-options

Prints option values before processing

-?, --help

Prints this screen or selected topics

-V, --version

Prints the current version

-X, --xml-validation STR

Set schema validation scheme of XML inputs ("never", "local", "auto" or "always")

-W, --no-warnings

Disables output of warnings

--aggregate-warnings INT

Aggregate warnings of the same type whenever more than INT occur

-l, --log FILE

Writes all messages to FILE (implies verbose)

--message-log FILE

Writes all non-error messages to FILE (implies verbose)

--error-log FILE

Writes all warnings and errors to FILE

--language STR

Language to use in messages

-q, --quiet

Not writing anything.