eaglectrl8
Advanced controls for eagle-usb driver.
Usage
eaglectrl [{-h | --help}]
[{-v | --version}]
[{-o | --options
options-file}]
[{-c | --cmvs
file}]
[{-d | --dsp
dsp-file}]
[{-i | --if}]
[{-s | --sync
sec}]
[{-p | --print}]
[{-w | --wizard}]
[{-g | --get-debug}]
[{-x | --set-debug
debug-mask}]
[{-l | --list-debug}]
Overview
This manual page documents briefly the eaglectrl commands.
Options
-
-h, --help -
Show summary of options.
-
-v, --version -
Show the version number of program.
-
-o, --options file -
Set options file (file defaults to /etc/eagle-usb/eagle-usb.conf).
-
-c, --cmvs file -
Set cmvs file (file defaults to /etc/eagle-usb/CMVep.txt).
-
-d, --dsp dsp-file -
Send Options, CMVS, and DSP file path is either a path to the DSP file or to a directory containing DSP files for ISDN and POTS. In this case eaglectrl will choose which file to send to modem depending on the modem type. Defaults to /usr/lib/eagle-usb.
-
-i, --if -
Print modem interface name.
-
-s, --sync sec -
Wait sec seconds for modem to be operationnal. If sec is 0 wait until synchro happens (infinite). Defaults to 60.
-
-p, --print -
Display detected devices.
-
-w, --wizard -
Wizard mode. Works if you have ONLY 1 eagle modem plugged in. Choose itself sequence to send to modem (firmware/DSP ..) NOTE: You can use it in conjunction with -o, -d and -s to specify the options file, DSP file and synchro timeout values to use.
-
-g, --get-debug -
Get debug mask.
-
-x, --set-debug debug-mask -
Set driver debug-mask to the given value, which can either be an haxadecimal number (0x0, 0xFF) or a list of debug flags separated by a comma. A list of available flags can be given by the
--list-debugoption.
-
-l, --list-debug -
Display a list of available flags for the debug-mask.