dar_cp1

Usage

Overview

dar_cp is similar to the standard 'cp' command, except it does not stop copying when an I/O error is met. Instead, it skips a bit further and continues to copy the rest of the file, as much as possible, filling the gaps by zeroed bytes.

dar_cp only accepts full filename (not directory) as argument. The reason of its existence in dar package is that you need it if you use Parchive with dar and have a corruption on a CD-R or any other read-only medium. You need to copy the corrupted slice on a read-write filesystem, for Parchive be able to repair it using slice associated redundancy files.

Options

-h

Displays help usage.

-V

Displays version information.

-f

without -f option, dar_cp will abort if the destination file exists, this is to prevent human error. However it may be useful to have a special device as destination like when facing a disk corruption in a unused block. dar_cp can then copy the content of this disk to another one of equal or larger size. But in that case the destination is also a special device and has to exists before dar_cp runs, where from the need of -f option. Once the disk copy has finished, one can then eventually resize partitions and file-systems to leverage the new larger disk.

Exit status

dar_cp exists with the following codes:

0

upon normal execution (be some corrupted parted skipped or not)

1

syntax error on command-line

2

could not open source or destination files

3

any other system error met during the copy

5

when some data could not be copied due to I/O error

Signals

Any signal sent to dar_cp will abort the program immediately, there is no way to have a proper termination before the end of the process

Known bugs

http://sourceforge.net/p/dar/bugs/