dahdi_cfg8
Configures dahdi kernel modules from /etc/dahdi/system.conf
Usage
dahdi_cfg [-c
CFG_FILE]
[-SNUM
[-SCHANS]]
[-s]
[-f]
[-t]
[-v
[-v ...]]
dahdi_cfg -h
Overview
dahdi_cfg configures DAHDI interface cards from a config file.
You generally need to run it with a valid configurations in order for DAHDI modules to work properly.
It must be run to configure every DAHDI span. Normally it is run from the DAHDI init script.
Options
-
-c CFG_FILE -
Use an alternative configuration file instead of /etc/dahdi/system.conf
If CFG_FILE is '
-', it is read from stdin.
-
-C CHANNELS -
Only apply changes to channels in the specified range. Only applicable when -S is in use.
-
-s -
Only shutdown spans.
-
-S SPAN -
Only apply changes to span no. SPAN. You also need to specify the range of channels in the span explicitly with -C.
-
-f -
Always configure every channel, even if it appears not to have changed.
-
-t -
Test mode. Don't do anything, just report what you wanted to do.
-
-v -
Be more verbose. Add extra v-s for extra verbosity.
-
-h -
Display a brief help message.
Files
/etc/dahdi/system.conf
The default location for the configuration file.
Releases
8 releases since Debian 6.0 (Squeeze); the text changed 3 times.
-C since Debian 8 (Jessie);
-S since Debian 8 (Jessie).