config-gfsd8

Usage

Overview

config-gfsd is a utility to set up a file sppol node of Gfarm file system. The server program for a file spool node is named gfsd. config-gfsd is required to be run with the root privilege, unless you use the file system for private purpose such as development, evaluation or test of Gfarm.

config-gfsd assumes that the configuration file %%SYSCONFDIR%%/gfarm2.conf (or %%SYSCONFDIR%%/gfsd.conf in case of the private-mode) exists on the host. Please copy the file from the metadata server, if missing.

It performs the following processes, in that order:

Please ask admin_user to register your host by the following command:
/usr/bin/gfhost -c -a x86_64-centos7.0-linux -p 600 -n 2 ext540

After that, start gfsd by the following command as a root:
systemctl start gfsd.service

Before set up a file spool node using config-gfsd, it is recommended to execute config-gfsd -t. With -t option, the sets up is not performed. Instead, it shows values of all configurable parameters:

$ config-gfsd -t
prefix                 [--prefix]:
hostname                     [-h]: host1.example.org
listen address               [-l]: (all local IP addresses)
architecture                 [-a]: x86_64-centos6.5-linux
port                         [-p]: 600
ncpu                         [-n]: 8
spool directory                  : /var/gfarm-spool
rc script                        : /etc/init.d/gfsd
gfarm client conf file           : /etc/gfarm2.conf
gfsd pid file                    : /var/run/gfsd.pid

The option name surrounded by [ ] means that you can specify a value with that option.

Options

--prefix path

Configure some paths related to gfsd. Specifically, the followings are affected.

• The spool directory of gfsd. That is PREFIX/var/gfarm-spool.

• The directory to put a PID file of gfsd. That is PREFIX/var/run.

• The directory of configuration files. That is PREFIX/etc.

• The directory of start/stop script for gfsd. That is PREFIX/etc/init.d or PREFIX/rc.d/init.d/etc which is depending on operating systems.

• If systemd is running on the host, there is a special exception. When an empty prefix is given by --prefix option on such host, config-gfsd doesn't put a unit configuration file for systemd. Instead, it puts traditional start/stop script at PREFIX/etc/init.d.

• The unconfiguration script unconfig-gfsd.sh. That is PREFIX/etc/unconfig-gfsd.sh.

The default is "" (empty).

-a architecture

Specify architecture of the host. config-gfsd gives this value to gfhost -c as an argument of -a option. config-gfsd guesses the architecture, and use it by default.

-p port

Specify a TCP port number the configured gfsd listens on. The default is 10600 if the private mode, 600 otherwise.

-h hostname

Specify a hostname of the host. config-gfsd gives this value to gfhost -c as an non-option argument. The default is the fully qualified domainname of the host on DNS.

-l address

Specify a listen address of gfsd. By default, it listens on all local IP addresses. If this option is specified, also the following changes occur:

• The name of start/stop script is changed from gfsd to gfsd-ADDRESS, when config-gfsd creates the script.

• The name of unit configuration file for systemd is changed from gfsd.service to gfsd-ADDRESS.service, when config-gfsd creates the file.

• The spool directory is changed from PREFIX/var/gfarm-spool to PREFIX/var/gfarm-spool-ADDRESS, where PREFIX is a prefix given by --prefix option.

-n ncpu

Specify the number of CPUs of the host. config-gfsd gives this value to gfhost -c as an argument of -n option. config-gfsd guesses the number of CPUs, and use it by default.

--help

Show usage, then exit.

-S

Enable the private mode. config-gfsd sets up the Gfarm file system which can be run without root privilege. Specifically, config-gfsd changes the configuration procedures as follows:

• The default listen port of gfsd (corresponding with -p option) is changed from 600 to 10600.

• It updates the configuration file %%SYSCONFDIR%%/gfsd.conf, instead of %%SYSCONFDIR%%/gfarm2.conf.

• It registers the file spool node by executing gfhost -c.

• It starts gfsd, unless -N option is given.

-S option never changes locations of a start/stop script and a configuration file. Since the default locations of those files are usually writable only for privilege users, config-gfsd fails to create them. To avoid this problem, also specify --prefix option.

-N

Do not start gfsd.

-f

Force overwriting an existing set up.

-t

Show values of all configurable parameters in human readable format, then exit immediately.

-T

Like '-t', but it shows values in KEY=VALUE format.

Files

%%SYSCONFDIR%%/gfarm2.conf

%%SYSCONFDIR%%/gfsd.conf

/etc/init.d/gfsd

/etc/systemd/system/gfsd.service