can_player1

positional arguments:

extra_args

The remaining arguments will be used for the interface and logger/player initialisation. For example, `-i vector -c 1 --app-name=MyCanApp` is the equivalent to opening the bus with `Bus('vector', channel=1, app_name='MyCanApp')

input-file

The file to replay. For supported types see can.LogReader.

options:

-h, --help

show this help message and exit

-c CHANNEL, --channel CHANNEL

Most backend interfaces require some sort of channel. For example with the serial interface the channel might be a rfcomm device: "/dev/rfcomm0". With the socketcan interface valid channel examples include: "can0", "vcan0".

-i {canalystii,cantact,etas,gs_usb,iscan,ixxat,kvaser,neousys,neovi,nican,nixnet,pcan,robotell,seeedstudio,serial,slcan,socketcan,socketcand,systec,udp_multicast,usb2can,vector,virtual}, --interface {canalystii,cantact,etas,gs_usb,iscan,ixxat,kvaser,neousys,neovi,nican,nixnet,pcan,robotell,seeedstudio,serial,slcan,socketcan,socketcand,systec,udp_multicast,usb2can,vector,virtual}

Specify the backend CAN interface to use. If left blank, fall back to reading from configuration files.

-b BITRATE, --bitrate BITRATE

Bitrate to use for the CAN bus.

--fd

Activate CAN-FD support

--data_bitrate DATA_BITRATE

Bitrate to use for the data phase in case of CAN-FD.

-f LOG_FILE, --file_name LOG_FILE

Path and base log filename, for supported types see can.LogReader.

-v

Also print can frames to stdout. You can add several of these to enable debugging

--ignore-timestamps

Ignore timestamps (send all frames immediately with minimum gap between frames)

--error-frames

Also send error frames to the interface.

-g GAP, --gap GAP

<s> minimum time between replayed frames

-s SKIP, --skip SKIP

<s> skip gaps greater than 's' seconds