astribank_tool8
Xorcom astribank (xpp) control tool
Usage
astribank_tool [options]
[operation ...]
-D
device-path
astribank_tool [-h]
Overview
astribank_tool is a tool to control the USB-level functionality of an Astribank. The tool operates on a single Astribank at a time (given as parameter to the -D command line option).
Options
-
-D device-path -
Required. The device to read from/write to. This is bus_num/device_num, where bus_num and device_num are the first two numbers in the output of lsusb(8) or dahdi_hardware(8). On older versions of this tool you needed a complete path to the device, which would be /dev/bus/usb/bus_num/device_num, or /proc/bus/usb/bus_num/device_num.
-
-p num -
Set the TwinStar port number. Either 0 or 1.
(TODO: explain).
-
-r type -
Reset the Astribank and renumerate its USB connection to power on product ID.
Tyep can be:
halforfull.(TODO: explain those).
-
-w 0|1 -
Enable (1) or disable (0) the TwinStar watchdog. When enabled, the Astribank will jump to the second port if this system is "not working" and the system on the second port is available.
-
-Q -
Query astribank properties via MPP protocol.
-
-n -
Renumerate the Astribank product number (e.g: from 1161 to 1162).
-
-v -
Increase verbosity. May be used multiple times.
-
-d mask -
Set debug mask to mask. Default is 0, 0xFF is "everything".
-
-h -
Displays usage message.
Releases
8 releases since Debian 6.0 (Squeeze); the text changed 2 times.