arv-tool-0.8(1)

Overview

Usage:

arv-tool-0.8 [OPTION?]: command <parameters>

Small utility for basic control of a Genicam device.

Help Options:

-h, --help: Show help options

Application Options:

-n, --name=<pattern>

-a, --address=<device_address>

--register-cache={disable|enable|debug}: Register cache policy

--range-check={disable|enable|debug}: Range check policy

--access-check={disable|enable}: Feature access check policy

-t, --time: Show execution time

-d, --debug={<category>[:<level>][,...]|help}

-v, --version: Show version

Command may be one of the following possibilities:

`genicam:`	dump the content of the Genicam xml data
`features:`	list all features
`values:`	list all available feature values
`description [<feature>] ...:`	show the full feature description
`control <feature>[=<value>] ...:`	read/write device features
`network <setting>[=<value>]...:`	read/write network settings

If no command is given, this utility will list all the available devices. For the control command, direct access to device registers is provided using a R[address] syntax in place of a feature name.

Examples

arv-tool-0.8 control Width=128 Height=128 Gain R[0x10000]=0x10 arv-tool-0.8 features arv-tool-0.8 description Width Height arv-tool-0.8 network mode=PersistentIP arv-tool-0.8 network ip=192.168.0.1 mask=255.255.255.0 gateway=192.168.0.254 arv-tool-0.8 -n Basler-210ab4 genicam

Releases

3 releases since Debian 11 (Bullseye); the text changed 1 time.

11
12–13

--access-check since Debian 12 (Bookworm); --range-check since Debian 12 (Bookworm); --register-cache since Debian 12 (Bookworm); --time since Debian 12 (Bookworm); --version since Debian 12 (Bookworm); -t since Debian 12 (Bookworm); -v since Debian 12 (Bookworm).