ao-send-telem1
Re-transmit stored telemetry file
Usage
ao-send-telem [-T
tty-device]
[--tty
tty-device]
[-D
altos-device]
[--device
altos-device]
[-F
frequency
(kHz)]
[--frequency
frequency
(kHz)]
[-R]
[--realtime]
<flight.telem>
Options
- -T tty-device | --tty tty-device
-
This selects which tty device ao-dumplog uses to communicate with the target device.
- -D AltOS-device | --device AltOS-device
-
Search for a connected device. This requires an argument of one of the following forms:
-
TeleDongle:2
TeleDongle
2
-
Leaving out the product name will cause the tool to select a suitable product, leaving out the serial number will cause the tool to match one of the available devices.
- -F kHz | --frequency kHz
-
This selects which frequency to send the specified packets on.
-
-R | --realtime -
This makes the program delay between packets in pad mode. Normally, pad mode packets are sent as quickly as possible.
Overview
ao-send-telem reads the specified flight telemetry log and re-transmits it via the specified ground station device
Releases
Unchanged in 6 releases since Debian 8 (Jessie).