ao-cal-freq1
Calibrate altos flight computer frequency
Usage
ao-cal-freq [-T
tty-device]
[--tty
tty-device]
[-D
altos-device]
[--device
altos-device]
[-v]
[--verbose]
[-n]
[--nosave]
[-o
cal-value-output-file]
[--output
cal-value-output-file]
Overview
ao-cal-freq drives the frequency calibration process and saves the result.
Options
- -T tty-device | --tty tty-device
-
This selects which tty device the debugger uses to communicate with the target device. The special name 'BITBANG' directs ao-dbg to use the cp2103 connection, otherwise this should be a usb serial port connected to a suitable cc1111 debug node.
- -D AltOS-device | --device AltOS-device
-
Search for a connected device. This requires an argument of one of the following forms:
-
TeleMega:2
TeleMega
2
-
Leaving out the product name will cause the tool to select a suitable product, leaving out the serial number will cause the tool to match one of the available devices.
- -o cal-value-output-file | --output cal-value-output-file
-
Writes the resulting calibration value to the specified file.
-
-n | --nosave -
Inhibits saving the calibration value on the device. Necessary for devices which don't have on-board configuration storage.
-
-v | --verbose -
Makes ao-cal-freq chatty about communication with the target device.
Usage
ao-cal-freq opens the target device, interactively calibrates the frequency, then shows the resulting calibration values and (optionally) saves them to configuration memory and/or a file.
Releases
5 releases since Debian 9 (Stretch); the text changed 1 time.
--nosave since Debian 10 (Buster);
--verbose since Debian 10 (Buster);
-n since Debian 10 (Buster);
-v since Debian 10 (Buster).