ao-cal-accel1
Calibrate altos flight computer accelerometers
Usage
ao-cal-accel [-T
tty-device]
[--tty
tty-device]
[-D
altos-device]
[--device
altos-device]
Overview
ao-cal-accel drives the built-in accelerometer calibration and validates the results.
Options
- -T tty-device | --tty tty-device
-
This selects which tty device the debugger uses to communicate with the target device. The special name 'BITBANG' directs ao-dbg to use the cp2103 connection, otherwise this should be a usb serial port connected to a suitable cc1111 debug node.
- -D AltOS-device | --device AltOS-device
-
Search for a connected device. This requires an argument of one of the following forms:
-
TeleMega:2
TeleMega
2
-
Leaving out the product name will cause the tool to select a suitable product, leaving out the serial number will cause the tool to match one of the available devices.
Usage
ao-cal-accel opens the target device, executes the accelerometer calibration command, verifies that it executed correctly, then shows the resulting calibration values and saves them to configuration memory.
Releases
Unchanged in 6 releases since Debian 8 (Jessie).