alsa-scarlett-gui(1)

alsa-scarlett-gui1

Gtk4 gui for the alsa controls presented by the focusrite scarlett/clarett kernel driver

Usage

alsa-scarlett-gui [FILE]

Overview

alsa-scarlett-gui is a Gtk4 GUI for the ALSA controls presented by the Linux kernel Focusrite Scarlett Gen 2/3/Clarett USB/Clarett+ Mixer Driver.

The Focusrite USB audio interfaces are class compliant meaning that they work "out of the box" on Linux as audio and MIDI interfaces (although on Gen 3 you need to disable MSD mode first for full functionality). However, except for some of the smallest models, they have a bunch of proprietary functionality that required a kernel driver to be written specifically for those devices.

Linux kernel support ("ALSA Focusrite Scarlett Gen 2/3 Mixer Driver") for the proprietary functionality was first added in:

•

Scarlett Gen 2: Linux 5.4 (bugs fixed in Linux 5.14)

•

Scarlett Gen 3: Linux 5.14

•

Clarett+ 8Pre: Linux 6.1

•

Clarett 2Pre/4Pre/8Pre USB, Clarett+ 2Pre/4Pre: coming soon

For full documentation, see: ⟨https://\:github\:.com/\:geoffreybennett/\:alsa\-scarlett\-gui⟩.

Options

FILE
Load the specified .state file on start

Bugs

•

The linear-dB scale of the volume controls doesn't work well. Lower volumes (e.g. below -30dB) don't need as much fine control as higher volumes.

•

Can’t select (focus) the gain/volume controls or use a keyboard to adjust them.

•

Level (monitoring) doesn't work yet and is disabled (needs kernel driver update).

•

Load/Save uses alsactl which will be confused if the ALSA interface name (e.g. USB) changes.

•

Load/Save is not implemented for simulated interfaces.

•

Lots of "couldn't find weak ref" warnings are emitted when loading a state file for simulation.

•

The read-only status of controls in interface simulation mode does not change when the HW/SW button is clicked.

•

When there's more than one main window open, closing one of them doesn't free and close everything related to that card.

•

There is no facility to group channels into stereo pairs (needs kernel support to save this information in the interface).

•

There is no facility to give channels custom names (needs kernel support to save this information in the interface).

•

No keyboard accelerators (e.g. Ctrl-Q to quit) have been implemented.

From alsa-scarlett-gui 0.5.1-1 in Debian 13 (Trixie). Parsed by carta from the page's man source.