airspyhf_rx1
Probe device and show configuration
Usage
airspy_rx
Overview
The AirspyHF is a tiny and efficient software defined radio receiver.
This application lets the user probe the device and show configuration.
Options
Usage:
-
-r <filename> -
Receive data into the file; stdout emits values on standard output
-s<serial number>-
Open device with specified 64bits serial number
-
-f <frequency> -
Set frequency in MHz between 9 kHz - 31 MHz or 60 - 260 MHz
-
-a <sample_rate> -
Set sample rate, at the moment only 768 kS/s supported
-
-n <#samples> -
Number of samples to transfer (default is unlimited)
-
-d -
Verbose mode
-
-w -
Receive data into file with WAV header and automatic name This is for SDR# compatibility and may not work with other software It works even with HDSDR
-
-g on|off -
HF AGC on / off
-
-l high|low -
HF AGC threshold high / low (when AGC On)
-
-t <value> -
HF attenuator value 0..8 (each step increases 6 dB the attenuation)
-
-m on|off -
on to activate LNA (preamplifier): +6 dB gain - compensated in digital.
-
-z -
Do not attempt to use manual AGC/LNA commands (useful in order to avoid errors with old firmware)
Releases
Unchanged in 3 releases since Debian 11 (Bullseye).