airspy_gpio1

Usage

Overview

The Airspy is a tiny and efficient software defined radio receiver.

This application lets the user read and write gpio pins.

Options

-p, --port_no <p>: set port number<p>[0,7] for subsequent read/write operations0

-n, --pin_no <n>: set pin number<n>[0,31] for subsequent read/write operations0

-r, --read: read port number/pin number value and direction specified by last -n argument, or all port/pin0

-w, --write <v>: write value specified by last -n argument with value<v>[0,1]0

[-s serial_number_64bits]: Open board with specified 64bits serial number.0

Examples

<command> -p 0 -n 12 -r # reads from port 0 pin number 120

<command> -r # reads all pins on all ports0

<command> -p 0 -n 10 -w 1 # writes port 0 pin number 10 with 1 decimal0

Hardware Info AirSpy

LED1(out): -p 0 -n 12 (0=OFF, 1=ON)0

Enable R820T(out): -p 1 -n 7 (0=OFF, 1=ON)0

Enable BiasT(out): -p 1 -n 13 (0=OFF, 1=ON)0