adelsystem_cbi8
Driver for the adelsystem cb/cbi dc-ups
Usage
adelsystem_cbi -h
adelsystem_cbi -a
DEVICE_NAME
[OPTIONS]
Supported hardware
This is the driver for the adelsystem cb/cbi dc-ups devices.
The driver has been tested against CBI2801224A, all in one 12/24Vdc DC-UPS.
More information about this UPS can be found here:
https://www.adelsystem.com/en/products/dc-ups-/
Extra arguments
This driver supports the following optional settings in the ups.conf(5) file:
Serial:
ser_baud_rate=value
A integer specifying the serial port baud rate (default 9600).
ser_data_bit=value
A integer specifying the serial port data bit (default 8).
ser_parity=value
A character specifying the serial port parity (default N).
ser_stop_bit=value
An integer specifying the serial port stop bit (default 1).
Modbus:
dev_slave_id=value
An integer specifying the device modbus slave ID (default 1).
Configuration
Here is an example of adelsystem_cbi driver configuration in ups.conf file:
[adelsystem_cbi] driver = adelsystem_cbi port = /dev/ttyUSB0 desc = "adelsystem cb/cbi ups driver" # serial settings ser_baud_rate = 9600 ser_parity = N ser_data_bit = 8 ser_stop_bit = 1 # modbus slave id dev_slave_id = 5
Instant commands
This driver support the following instant commands:
load.off
executes "instant poweroff"
Installation
This driver may be not built by default. You can build it by installing libmodbus and running configure --with-modbus=yes.
You also need to give proper permissions on the local serial device file (/dev/ttyUSB0 for example) to allow the run-time NUT driver user account to access it.
Releases
3 releases since Debian 12 (Bookworm); the text changed 2 times.