SNMP::Info::Layer3::C65003pm
Snmp interface to cisco catalyst 6500 layer 2/3 switches running ios and/or catos. also cisco catalyst 2960, 2970, 3750 and 3850 series and blade switch cbs30x0 and cbs31x0 series running ios.
Usage
# Let SNMP::Info determine the correct subclass for you.my $c6500 = new SNMP::Info(AutoSpecify => 1,Debug => 1,# These arguments are passed directly to SNMP::SessionDestHost => 'myswitch',Community => 'public',Version => 2)or die "Can't connect to DestHost.\n";my $class = $c6500->class();print "SNMP::Info determined this device to fall under subclass : $class\n";
Overview
Abstraction subclass for Cisco Catalyst 6500 Layer 2/3 Switches.
These devices run IOS but have some of the same characteristics as the Catalyst WS-C family (5xxx). For example, forwarding tables are held in VLANs, and extended interface information is gleaned from CISCO-SWITCH-MIB.
It also supports the following IOS only series switches: Cisco Catalyst 2960, 2970, 3750 and 3850 series. Also blade switches from the CBS30x0 and CBS31x0 series.
Inherited Classes
- SNMP::Info::CiscoStack
- SNMP::Info::Layer3::CiscoSwitch
- SNMP::Info::MAU
Required MIBs
- CISCO-VIRTUAL-SWITCH-MIB
- Inherited Classes' MIBs
-
See "Required MIBs" in SNMP::Info::CiscoStack for its own MIB requirements.
See "Required MIBs" in SNMP::Info::Layer3::CiscoSwitch for its own MIB requirements.
See "Required MIBs" in SNMP::Info::MAU for its own MIB requirements.
Globals
These are methods that return scalar value from SNMP
$c6500->
|
Returns 'cisco' |
|---|---|
$c6500->
|
Returns the Switch status: multiNode or standalone. |
$c6500->
|
Return 1 if the switch ( |
$c6500->
|
Returns serial number of unit (falls back to |
Globals imported from SNMP::Info::CiscoStack
See documentation in "GLOBALS" in SNMP::Info::CiscoStack for details.
Globals imported from SNMP::Info::Layer3::CiscoSwitch
See documentation in "GLOBALS" in SNMP::Info::Layer3::CiscoSwitch for details.
Globals imported from SNMP::Info::MAU
See documentation in "GLOBALS" in SNMP::Info::MAU for details.
Table methods
These are methods that return tables of information in the form of a reference to a hash.
Overrides
- $c6500->
i_duplex() -
Returns reference to hash of iid to current link duplex setting.
Newer software versions return duplex based upon the result of
$c6500->el_duplex(). Otherwise it uses the result of the call toCiscoStack::i_duplex().See SNMP::Info::EtherLike for
el_duplex()method and SNMP::Info::CiscoStack for itsi_duplex()method.
- $c6500->
i_duplex_admin() -
Returns reference to hash of iid to administrative duplex setting.
Newer software versions return duplex based upon the result of
$c6500->p_duplex(). Otherwise it uses the result of the call toCiscoStack::i_duplex().See SNMP::Info::CiscoStack for its
i_duplex()andp_duplex()methods.
- $c6500->set_i_duplex_admin(duplex, ifIndex)
-
Sets port duplex, must be supplied with duplex and port
"ifIndex".Speed choices are 'auto', 'half', 'full'.
Crosses
$c6500->p_port()with$c6500->p_duplex()to utilize port"ifIndex".Example:my %if_map = reverse %{$c6500->interfaces()};$c6500->set_i_duplex_admin('auto', $if_map{'FastEthernet0/1'})or die "Couldn't change port duplex. ",$c6500->error(1);
- $c6500->set_i_speed_admin(speed, ifIndex)
-
Sets port speed, must be supplied with speed and port
"ifIndex".Speed choices are '10', '100', '1000'.
Crosses
$c6500->p_port()with$c6500->p_speed()to utilize port"ifIndex".
Table Methods imported from SNMP::Info::CiscoStack
See documentation in "TABLE METHODS" in SNMP::Info::CiscoStack for details.
Table Methods imported from SNMP::Info::Layer3::CiscoSwitch
See documentation in "TABLE METHODS" in SNMP::Info::Layer3::CiscoSwitch for details.
Table Methods imported from SNMP::Info::MAU
See documentation in "TABLE METHODS" in SNMP::Info::MAU for details.
Releases
9 releases since Debian 5.0 (Lenny); the text changed 8 times.