SNMP::Info::Layer3::Aironet(3pm)

Usage

 # Let SNMP::Info determine the correct subclass for you.
 my $aironet = new SNMP::Info(
                          AutoSpecify => 1,
                          Debug       => 1,
                          DestHost    => 'myswitch',
                          Community   => 'public',
                          Version     => 2
                        )
    or die "Can't connect to DestHost.\n";
 my $class      = $aironet->class();
 print "SNMP::Info determined this device to fall under subclass : $class\n";

Overview

SNMP::Info subclass to provide access to SNMP data for an Aironet device running Aironet software, not cisco IOS.

Note there are two classes for Aironet devices :

`SNMP::Info::Layer3::Aironet`	This class is for devices running Aironet software (older)
`SNMP::Info::Layer2::Aironet`	This class is for devices running Cisco IOS software (newer)

For speed or debugging purposes you can call the subclass directly, but not after determining a more specific class using the method above.

 my $aironet = new SNMP::Info::Layer3::Aironet(...);

Inherited Classes

SNMP::Info::Layer3

Required MIBs

AWCVX-MIB

IEEE802dot11-MIB

Globals

These are methods that return scalar value from SNMP

$aironet->awc_duplex()

Gives the admin duplex setting for the Ethernet Port.

"awcEtherDuplex.0"

$aironet->mac()

Gives the MAC Address of the wireless side

"dot11StationID.2"

$aironet->os(): 'aironet'

$aironet->os_ver: Tries to cull the version from the description field.

$aironet->vendor(): Returns 'cisco'.

Globals imported from SNMP::Info::Layer3

See documentation in "GLOBALS" in SNMP::Info::Layer3 for details.

Table methods

These are methods that return tables of information in the form of a reference to a hash.

Overrides

$aironet->bp_index(): Takes the bp_index() value from SNMP::Info::Bridge and overrides the wireless port to be assigned to the transparent bridge port (port 0)

$aironet->fw_mac(): Adds static table entries from bs_mac() to port 0 so that wireless MAC addresses will be reported. Forwarding table entries for port 0 are removed.

$aironet->fw_port(): Adds the static table port mappings to the forwarding table port mappings by adding bs_port() to fw_port()

$aironet->i_duplex(): Adds the value of awc_duplex() to each Ethernet port seen.

$aironet->i_mac(): Overrides the values for i_mac with the value from awc_mac() if they are set.

$aironet->i_ignore(): Ignores ports that are of type ``rptr'' and ``lo''.

Aironet specific items

$aironet->awc_default_mac()

Gives the default MAC address of each interface.

"awcIfDefaultPhysAddress"

$aironet->awc_mac()

Gives the actual MAC address of each interface.

"awcIfPhysAddress"

$aironet->awc_ip()

Gives the IP Address assigned to each interface.

"awcIfIpAddress"

$aironet->awc_netmask()

Gives the NetMask for each interface.

"awcIfIpNetMask"

$aironet->awc_msdu(): "awcIfMSDUMaxLength"

Table Methods imported from SNMP::Info::Layer3

See documentation in "TABLE METHODS" in SNMP::Info::Layer3 for details.

Releases

9 releases since Debian 5.0 (Lenny); the text changed 8 times.

5.0
6.0
7
8
9
10
11
12
13