LimeUtil1
Control and update lms7 based transceiver devices
Usage
LimeUtil [OPTIONS]
Overview
LimeUtil is a tool to show information about and control LMS7 based transceiver devices such as the LimeSDR. It can be used to update the firmware and to calibrate the device.
Options
-
--help -
Print a help message.
-
--info -
Print information about LimeSuite and found devices.
-
--find[="SPEC"] -
Discover available devices, restricted to those matching the SPEC if given. If no matching devices are found it will exit with exit status 1.
-
--make[="SPEC"] -
Create a device instance.
Advanced options
-
--args[="ARGS"] -
Supply arguments ARGS to the
--update,--fpgaand--fwoptions.
-
--update -
Download latest firmware and program it into the device flash memory.
-
--fpga="FILE" -
Program FPGA firmware image in FILE to device flash memory.
-
--fw="FILE" -
Program FX3 firmware image in FILE to device flash memory.
-
--timing -
Time interfaces and operations.
Calibrations sweep
-
--cal[="ARGS"] -
Calibrate device. Use ARGS to select and configure device.
-
--start=FREQ -
Start calibration sweep at frequency FREQ Hz.
-
--stop=FREQ -
Stop calibration sweep at frequency FREQ Hz.
-
--step=STEP -
Step frequency during calibration sweep by STEP Hz (default 1 MHz).
-
--bw=BW -
Set calibration bandwidth to BW Hz (default 30 MHz).
-
--dir=DIR -
Set calibration direction to DIR (one of RX, TX or BOTH, default is BOTH).
-
--chans=CHANNELS -
Set calibration channels to CHANNELS (one of 0, 1 or ALL, default is ALL).
Homepage
LimeUtil is part of the Lime Suite ⟨https://myriadrf.org/projects/lime-suite/⟩.
Releases
Unchanged in 4 releases since Debian 10 (Buster).