GENLIB_LOTRS(3)

Synopsys

#include <genlib.h>
void GENLIB_LOTRS(type,width,length,grid,source,drain)
char type;
long width, length;
char ∗grid, ∗source, ∗drain;

Parameters

`type`	Type of the transistor to be created in the current figure
`width, length`	Size of the transistor
`grid, source, drain`	Name of the signals on which the given transistor connector are to be linked

Overview

LOTRS add a logical transistor to the current working figure. This transistor has each of its pin logicaly linked to the adequat signal given as parameter. The type attribut may take the following values:

`TRANSN`	for a N type mos transistor.
`TRANSP`	for a P type mos transistor.

Error

"GENLIB_LOTRS impossible : missing GENLIB_DEF_LOFIG"

No figure has been yet specified by a call to DEF_LOFIG. So it isn't possible to add anything. you must call DEF_LOFIG before any other netlist call.

Examples

#include <genlib.h>
main()
{
	/∗ Create a figure to work on, an inverter  ∗/
	GENLIB_DEF_LOFIG("n1");
	/∗ define interface  ∗/
	GENLIB_LOCON("i", IN, "input");
	GENLIB_LOCON("f", OUT, "output");
	GENLIB_LOCON("vdd", IN, "vdd");
	GENLIB_LOCON("vss", IN, "vss");
	/∗ Place transistors ∗/
	GENLIB_LOTRS(TRANSP, 5, 4, "input", "vdd", "output");
	GENLIB_LOTRS(TRANSN, 2, 4, "input", "vss", "output");
	/∗ Save all that on disk ∗/
	GENLIB_SAVE_LOFIG();
}

Releases

Unchanged in 4 releases since Debian 7 (Wheezy).

7–10