3c5x9setup8
Setup program for the 3com 3x9 cards.
Usage
3c5x9setup [options]
Overview
3c5x9setup is a program that you can use to setup 3Com 3c5x9 series ethercards.
Options
These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below.
-
-h, --help -
Show summary of options.
-
-v, --version -
Show version of program.
-
-V, --verbose -
Verbose mode
-
-D, --debug -
Show Debug messages
-
-a, --all -
Print all registers
-
-p, --base-address <port> -
Specify port to use
-
-E, --emergency-rewrite -
Re-write a corrupted EEPROM
-
-f, --force-detection -
Force if card is busy
-
-F, --new-interface <type> -
Interface type to be used. This can be 10baseT, 10base2 or AUI.
-
-P, --new-IOaddress, --new-base-address <port> -
New base I/O address
-
-H, --new-hwaddress <addr> -
New base hardware address
-
-Q, --new-irq <irq> -
Specify interrupt number
-
-w, --write-EEPROM <values> -
Write to the EEPROMS with the specified values.
Releases
6 releases since Debian 2.2 (Potato); the text changed 1 time.
--all since Debian 3.0 (Woody);
--base-address since Debian 3.0 (Woody);
--debug since Debian 3.0 (Woody);
--emergency-rewrite since Debian 3.0 (Woody);
--force-detection since Debian 3.0 (Woody);
--help since Debian 3.0 (Woody);
--new-IOaddress since Debian 3.0 (Woody);
--new-base-address since Debian 3.0 (Woody);
--new-hwaddress since Debian 3.0 (Woody);
--new-interface since Debian 3.0 (Woody);
--new-irq since Debian 3.0 (Woody);
--verbose since Debian 3.0 (Woody);
--version since Debian 3.0 (Woody);
--write-EEPROM since Debian 3.0 (Woody);
-D since Debian 3.0 (Woody);
-E since Debian 3.0 (Woody);
-F since Debian 3.0 (Woody);
-H since Debian 3.0 (Woody);
-P since Debian 3.0 (Woody);
-Q since Debian 3.0 (Woody);
-V since Debian 3.0 (Woody);
-a since Debian 3.0 (Woody);
-f since Debian 3.0 (Woody);
-h since Debian 3.0 (Woody);
-p since Debian 3.0 (Woody);
-v since Debian 3.0 (Woody);
-w since Debian 3.0 (Woody).