3c515-diag8
Setup and diagnostic program for the 3com 3c515 ethernet cards.
Usage
3c515-diag [options]
Overview
3c515-diag is a program that you can use to diagnose problems with 3Com 3c515 ethercards as well as reconfiguring it.
Options
These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below.
-
-h, --help -
Show summary of options.
-
-V, --version -
Show version of program.
-
-v, --verbose -
Verbose mode.
-
-q, --quiet -
Be very unverbose.
-
-a, --all -
Print all registers.
-
-p, --base-address <port> -
Specify port to use. Valid values are: 0x240, 0x280, 0x300, 0x320, 0x340, 0x360
-
-f, --interface <interface> -
Interface number. Valid Options are: 10baseT, 10base2, and 10Mbs AUI.
-
-Q, -i, --irq <irq> -
Specify new interrupt. Valid values are: 3-5,7,9-15.
-
-w, --write-EEPROM <values> -
Write to the EEPROMS with the specified values.
Releases
Unchanged in 5 releases since Debian 3.0 (Woody).