Lingua::DE::ASCII (3perl)

  use Lingua::DE::ASCII;
  print to_ascii("Umlaute wie �,�,�,� oder auch � usw. " .
                 "sind nicht im ASCII Format " .
                 "und werden deshalb umgeschrieben);
  print to_latin1("Dies muesste auch rueckwaerts funktionieren ma cherie");

This module enables conversion from and to the \s-1ASCII\s0 format of german texts.

It has two methods: \*(C`to_ascii\*(C' and \*(C`to_latin1\*(C' which one do exactly what they say.

Please note that both methods take only one scalar as argument and not whole a list.

\$1

The \*(C`to_ascii\*(C' method is just simple. It replaces each printable \s-1ANSI\s0 character (codes 160..255) with a (hopefully) sensfull \s-1ASCII\s0 representation (might be more than one character). The \s-1ANSI\s0 character with codes 128..160 are not printable and they are removed by default. The transliteration is defined with the global %Lingua::DE::ASCII::ANSI_TO_ASCII_TRANSLITERATION variable. You can change this variable if you want to change the transliteration behaviour. The \*(C`to_latin1\*(C' method is very complex (more than 700 lines of code). It retranslates 7-bit \s-1ASCII\s0 representations into a reasonable german \s-1ANSI\s0 representation. Thus it changes mainly 'ae' to '�', 'oe' to '�', 'ue' to '�', 'ss' to '�'. It also changes some other characters, e.g. '(C)' to '�' or in words like 'Crepe' it also restores the really writing 'Cr�pe'.

Of course, the method only tries to change where it should. That explains the enormous complexity of this method, as it tries to solve a hard linguistic problem with a bit logic and many regular expressions (please also look to \s-1BUGS\s0 if you are interested in known problems).

It's quicker to let \*(C`to_latin1\*(C' work on a big (even multiline) string than to make a lot of callings with little strings (like lines or words). The reason is that the method works with a lot of regular expressions (as nearly every line of code contains a regexp). As Perl is very good to optimize them especially for long strings, you can gain a good speed advantage if you need it.

At the moment you can't change the behaviour of the \*(C`to_latin1\*(C' method (e.g. switching from the new german spelling to the old one), and I'm not sure whether I will enable it. Please inform me, if you feel that it would be important or much convenient in a case. to_ascii($string) to_latin1($string)

That's only a stupid computer program, faced with a very hard \s-1AI\s0 problem. So there will be some words that will be always hard to retranslate from \s-1ASCII\s0 to Latin-1 encoding. A known example is the difference between \*(L"Ma�(einheit)\*(R" and \*(L"Masseentropie\*(R" or similar. Another examples are \*(L"fl�sse\*(R" and \*(L"Fl��e\*(R" or \*(L"(Der Schornstein) ru�e\*(R" and \*(L"Russe\*(R", \*(L"Geheimtuer(isch)\*(R" and \*(L"Geheimt�r\*(R", \*(L"anzu-ecken\*(R" and \*(L"anz�cken\*(R" or quite even a lonely \*(L"ss\*(R" or \*(L"�\*(R". Also, it's hard to find the right spelling for the prefixes \*(L"miss-\*(R" or \*(L"mi�-\*(R". In doubt I tried to use to more common word and in even still a doubt the program tries to be conservative, that means it prefers not to translate to an umlaut. Reason is that the text is still readable with one \*(L"ae\*(R",\*(L"oe\*(R",\*(L"ue\*(R" or \*(L"ss\*(R" too much, but a wrong \*(L"�\*(R", \*(L"�\*(R", \*(L"�\*(R" or \*(L"�\*(R" can make it very unreadable.

I tried it with a huge list of german words, but please tell me if you find a bug.

This module is intended for \s-1ANSI\s0 code that is e.g. different from windows coding.

Misspelled words will create a lot of extra mistakes by the program. In doubt it's better to write with new Rechtschreibung.

The \*(C`to_latin1\*(C' method is not very quick (but quick enough to work interactively with text files of about 100 \s-1KB\s0). It's programmed to handle as many exceptions as possible.

I avoided localizations for character handling (thus it should work on every computer), but the price is that in some rare cases of words with multiple umlauts (like \*(L"H�kelt�lle\*(R") some buggy conversions can occur. Please tell me if you find such words.

The \*(C`to_latin1\*(C' method also has some knowledge to work with some basic English. (So that some words don't confuse everything and you can also use some code snippets in your text). However, it is very recommended to use American English instead of British English. Espeically many plural forms (ending on \*(L"oes\*(R") are hard to handle, and often I decided not to implement an extra rule as it is a \*(C`Lingua::DE::*\*(C' module and not an English one.

The test scripts (called by e.g. \*(C`make test\*(C') need a long time. The reason is that I test it with a huge german word list. Normally you can skip this test if there is no failing in the first few seconds. However, the tests also have a progress bar (either a Term::ProgressBar if installed or just a simple text output), so that you can see the advances :-)

There are two major reasons why I added so many words to test even to the \s-1CPAN\s0 release. On the one hand, I wanted to give you a chance to detect strange behaviour under uncommon circumstances. (I haven't test it under a non-german locale based operation system e.g. and I have also included that words are tests under a random environment to find out unexpected errors) On the other hand, I also wanted you to give a chance to detect yourself whether a \*(C`to_latin1\*(C' result is a bug or a feature. (Just search through the content of the test files to determine whether a strange looking word is tested for and thus wanted).

There is also a test with common 1000 English words (having an ae,oe,ue or ss inside), as German is nowadays often mixed with a lot of them, and this module should not be confused with them.

Janek Schleicher, <[email protected]>

Lingua::DE::Sentence (another cool module)